• Tap doan Rosenberg
  • Box fans
  • Dong Co EC
  • Slide 01

Maintenance tasks for fans Rosenberg

Maintenance tasks for fans Rosenberg

Type, scope, frequency, and other additional necessary activities, must be decided according to the use

of the fans in the conditions predominant at the installation location. The check list below provides

points of reference for the tasks to be carried out.

Measures on the fan / motor in Maintenance tasks for fans Rosenberg

At Regular

Intervals

As

Required

Confirm that the equipment is being used as intended.

x

General inspection for obvious defects

x

Inspect the intake area, e.g. for contamination or loose parts

x

Inspect equipment and its surface protection for contamination, damage, or corrosion, and correct it appropriately if required

x

Inspect the rotor for damage and imbalance, and carry out oscillation

measurements if necessary (see below)

x

Ensure correct installation

x

Inspect bearings, especially

- ease and evenness of running, and lack of play

- atypical running noises

- grease collars, loss of oil

x

Inspect flexible connections for leaks

x

Confirm the correct functioning of electrical and mechanical protective

devices

x

Where necessary, confirm that the condensate drain functions correctly

x

When cleaning to maintain correct functioning, do not use high pressure or steam jet cleaners, or aggressive cleaning agents

x

Inspect screwed connections, and tighten if required, complying with the specified tightening torques

x

Check that connection terminals and cables or sockets are tight, and that they operate correctly; fix faults appropriately where required

- tightness of fit

- corroded parts

- damp

- visible damage

x

Ensure an even gap between the rotor and the intake nozzle

x

Ensure that maker's plate data is legible

x

The contact addresses are to be found in the attachment, or else please phone +49 (0)7940 / 142- 209

(-210) or email to info@rosenberg.com.vn

back

Return to Top