Safety instruction in Operating Instructions for Rosenberg fans.

The fans can present dangers from live electrical parts and from rotating equipment which may

cause injury and /or damage. To prevent injury and/or damage, sufficient safety precautions must be

taken.

The standard axial, bifurcated, roof and centrifugal fans are not equipped with a shock-hazard

protection, since their preferred place of installation is in tubing systems

When installing the fan, always make sure to verify that the impeller may not be touched. If this may

not be excluded altogether, then the installation of a hazard-shock protection in accordance with the

applicable standards will be required.

Only use the fan after it has been securely mounted and fitted with protection guards to suit the application.

Installation, electrical and mechanical maintenance and service should only be undertaken by qualified engineers.

The fan must be used according to its design parameters, with regard to performance and mediums passing through it.

It is the responsibility of the users to satisfy themselves that the fan is suitable for the conditions of use and that the installations and regular maintenance is carried out by personnel with the appropriate skills and in accordance with these instructions.

Storage / Transport in Operating Instructions for Rosenberg fans.

Store the fan on a dry and weather protected place. Cover the fan with tarpaulin and protect the fans against influence of dirt (i.e. stones, splinters, wires etc.).

Storage temperatures between – 200C and +400C.

With Storage times of more than 1 year .please check the bearings on soft running before mounting.

(Turn by hand).

Transport the fan with suitable loading means. Avoid a distortion of casing or blades or other

damage.

Use proper and suitable lifting boom for hoisting during transportation.

The contact addresses are to be found in the attachment, or else please phone +49 (0)7940 / 0917 186 894 or email to info@rosenberg.com.vn